• 1 Service Per Year On Unit Of Your Choice (Heat or A/C)
  • 1 inch replacement filters



  • 2 Services Per Year, 1 per unit (heat & A/C)
  • 1 inch replacement filters
  • 15% Parts Discount


Does My System Need Maintenance?

Regular preventive maintenance for your HVAC system should always be considered a top priority for Kentucky homeowners. Unfortunately, it’s something that often gets overlooked. Some believe that they don’t need to worry about issues occurring because their AC is new, but this doesn’t mean you won’t experience any problems. When a system fails, it can cost a substantial amount of money to fix, not to mention leave you stranded on days that can be uncomfortably hot. We service all makes and models, including ClimateMaster and WaterFurnace!

Air Conditioning Maintenance:

  • Check thermostat and settings
  • Check filter
  • Check drains for proper drainage
  • Check blower wheel for excessive dirt
  • Check 24V wiring to outside wall
  • Check 240V wiring to outside wall
  • Check outdoor coil
  • Clean outdoor coil
  • Check wall penetration for proper seal
  • Check 240V connections
  • Check high voltage disconnect
  • Check unit ground and tighten
  • Check contactor for burn marks/pitting
  • Check fan motor visually
  • Check fan blade for damage
  • Check capacitor visually
  • Check wiring connections and tighten
  • Measure temperature at coil
  • Measure condenser AMP draw
  • Inspect thermostat and settings
  • Observe unit starting sequence
  • Check drains for proper drainage

Furnace Maintenance:

  • Check heat exchanger for rust/ cracks/ holes
  • Check venting for rust/ corrosion
  • Check gas valve for leaks/ corrosion
  • Check control wiring and connections
  • Check gas lines for rust/ corrosion/ support
  • Check for Carbon Monoxide in supply/exhaust
  • Inspect low high voltage wiring
  • Check burners for rust/proper operation
  • Check ignition for proper operation
  • Check burner setup
  • Check blower assembly for vibration/ dirt buildup
  • Check filter
  • Check hot surface ignitor/ spark ignitor
  • Check pressure switch and tube
  • Measure AMP draw for inducer motor and blower motor
  • Measure temperature rise

Don't wait for an emergency to get your system in sync!

Select the right plan for your home below

call us at 859-687-0553

Service Agreement

Get Started